How to Monitor Your Enphase Home Solar System with Telegraf

Motivation

I had an Enphase solar system installed in 2020 and the default logging interval for the Enphase appliance was 15 minutes. Being the data hoarder I am, a 15 minute interval was far too long and I wanted closer intervals to see near real-time performance of my solar modules.

Luckily I already had a influxdb instance setup and previously used telegraf to monitor an assortment of random things. I have influxdb and telegraf running on Kubernetes but this could easily be done on platforms as well.

Telegraf Setup

Overall Monitoring Conifg

To scrape overall production and consumption metrics, the endpoint http://envoy/production.json is used. No authentication is required and I have it set to collect at a 5s interval. With telegraf’s http plugin.

There is another endpoint at http://envoy/stream/meter that provides roughly the same data but in a continuous data stream. However this requires you to authenticate with the installer account.

The password is generated from the Envoy’s serial number you can find a python program that calculates the password here.

data: {
	"production": {
		"ph-a": {
			"p": -0.0,
			"q": 246.83,
			"s": 250.973,
			"v": 116.644,
			"i": 2.152,
			"pf": 0.0,
			"f": 60.0
		},
		"ph-b": {
			"p": 0.0,
			"q": 249.456,
			"s": 253.101,
			"v": 117.464,
			"i": 2.155,
			"pf": 0.0,
			"f": 60.0
		},
		"ph-c": {
			"p": 0.0,
			"q": 0.0,
			"s": 0.0,
			"v": 0.0,
			"i": 0.0,
			"pf": 0.0,
			"f": 0.0
		}
	},
	"net-consumption": {
		"ph-a": {
			"p": 1105.994,
			"q": -353.462,
			"s": 1208.699,
			"v": 116.647,
			"i": 10.344,
			"pf": 0.91,
			"f": 60.0
		},
		"ph-b": {
			"p": 500.877,
			"q": -206.518,
			"s": 606.291,
			"v": 117.436,
			"i": 5.16,
			"pf": 0.83,
			"f": 60.0
		},
		"ph-c": {
			"p": 0.0,
			"q": 0.0,
			"s": 0.0,
			"v": 0.0,
			"i": 0.0,
			"pf": 0.0,
			"f": 0.0
		}
	},
	"total-consumption": {
		"ph-a": {
			"p": 1105.994,
			"q": -600.292,
			"s": 1457.715,
			"v": 116.646,
			"i": 12.497,
			"pf": 0.76,
			"f": 60.0
		},
		"ph-b": {
			"p": 500.877,
			"q": -455.973,
			"s": 859.121,
			"v": 117.45,
			"i": 7.315,
			"pf": 0.58,
			"f": 60.0
		},
		"ph-c": {
			"p": 0.0,
			"q": 0.0,
			"s": 0.0,
			"v": 0.0,
			"i": 0.0,
			"pf": 0.0,
			"f": 0.0
		}
	}
}

The stream endpoint outputs a broken JSON file and you need to add mustaches to the beginning and end of the each data chunk.

I played around with it a little but was not able to find an easy way to do this while maintaining the stream.

Module Monitoring Config

Module monitoring is done via the telegraf’s exec plugin due to the lack of http digest support from the http plugin. I know, there probably is a better way to do it, but it works.

This endpoint requires digest authentication. The user in this case is envoy and the password is the last 6 digits of your serial number. You can find your serial number by visiting http://envoy/home.

Grafana Dashboard

I threw together a quick grafana dashboard that utilizes some of the data scraped above and gives me near realtime monitoring capabilities.

Theres defiantly a lot of potential for visualization and data analysis with the scraped data. I will probably integrate calculated costs and net consumption for each TOU cost tier or alerts based on individual module output to notify me when a cleaning needs to be done in the future.

You can find the grafana code for the dashboard here.

Related Posts

Terraform Tips & Tricks – Part 1 – Building A Constant Reference

One of the most common problems I see in large organizations when working with terraform is consistency. When we have a large amount of resources being managed…

Everything You Ever Wanted to Know About Istio but Were Afraid to Ask

Istio is a powerful service mesh that integrates natively with Kubernetes, I have been using Istio as my service mesh, ingress, and egress gateways on my personal…

How to Deploy Anthos on Bare Metal On-Prem

Introduction The main advantage of Anthos on BM over Anthos on VMWare for on-prem deployments is the ability to run Anthos clusters without a hypervisor license. Cluster…

OPA Gatekeeper: Bringing Law and Order to Kubernetes

Introduction Open Policy Agent (OPA) is a policy based control agent that is able to be integrated on various platforms. For the sake of this document we…

How to Setup Anthos on GKE Autopilot with Private Certificate Authority

What You Will Create The guide will set up the following: 2 Private GKE autopilot clusters with master global access ASM with multicluster mesh IstioIngress gateway to…

How to Setup a pfSense IPsec VPN Connection Behind a Router to Google Cloud

A tutorial on how to setup a virtual pfSense router behind a main router for VPN communications with Google Cloud Platform.

Leave a ReplyCancel reply

Exit mobile version